How to Reset a Whirlpool Refrigerator Water Filter Alarm

Whirlpool  Fridge will need a water filter for optimal operation. Consequently, if there's an issue with this component, a warning indicator will be activated. So, how can you reset this alarm related to the water filter?

To reset the alert, you'll need to locate the water filter button, and you may consult the owner's manual for assistance in finding it. Subsequently, press and hold this button for a duration of three seconds. The successful reset will be indicated by a beeping sound or a change in the colour of the water filter indicator on the refrigerator's screen.

Water filter alarms are a commonly encountered problem and are generally straightforward to address. Continue reading to understand the reasons for receiving this alert and the steps to take in response.

Key Facts

1. Water filter reset process: Locate the water filter button and press it for 3 seconds until a beep or indicator change confirms the reset.

   Advertise here

2. Alternative reset for French-door models: Press and hold “Energy Saver” + “Fast Cool” buttons for 3 seconds to clear the alert.

3. Manual reset required: Whirlpool filter alarms don’t reset automatically after filter replacement.

4. Filter replacement frequency: Recommended every 3–6 months depending on water usage.

5. Post-replacement flushing: Run 3–4 gallons of water through the new filter before use.

What Are the Steps to Reset a Whirlpool Refrigerator Water Filter Alarm?

Resetting the water filter on your Whirlpool refrigerator is typically a straightforward process, although the specific steps may vary slightly depending on your model. Generally, the following method should work:

Step 1: Locate the water filter button

The exact position of the button may vary depending on your refrigerator model. Typically, it can be found near or adjacent to the water filter indicator light. In some cases, it might be positioned externally on the fridge, while certain models may have this button inside the refrigerator. If you have trouble finding it, consulting the owner's manual can help you determine its precise location.

Step 2: Press and hold for three seconds

Pressing and holding this button for a duration of three seconds will initiate the reset process for your refrigerator. You should hear a beeping sound as confirmation. Alternatively, the colour of the filter indicator light may change from orange to blue, indicating that the reset has been successfully completed.

For French-door, bottom-mounted fridge models, the procedure differs slightly. You will need to utilise the touch-screen buttons. In this case, simultaneously press the energy saver and fast cool buttons. After three seconds, the filter will reset, and the warning light should disappear.

If these methods do not effectively reset your filter, referring to the owner's manual will help you identify the appropriate procedure for your specific refrigerator model.

Read Also: How to Dry Hey Dudes Fast

Pros and Cons of Whirlpool Refrigerator

Pros

• Reliability
• Variety of Models
• Energy Efficiency
• Innovative Features

Cons

• Price
• Noise Levels
• Water and Ice Dispensers
• Service and Repairs

Differences Between Whirlpool Refrigerators and Bosch Refrigerators

Whirlpool

Whirlpool offers a wide range of features, but its focus is typically on reliability and basic functionality. You can find innovations like humidity-controlled crispers and adaptive defrost systems.

Bosch

Bosch refrigerators tend to include more advanced technology, such as air purification systems, touch controls, and customizable temperature zones. They also prioritize energy efficiency and quieter operation.

Alternative to Whirlpool Refrigerator

Frigidaire

Frigidaire is known for its affordable and reliable refrigerators, catering to a wide range of budgets. They offer models in various configurations, including French doors and top freezers.

Why Do You Need to Reset a Water Filter Alert on the Whirlpool Fridge?

On occasion, even after replacing the water filter, the alert may persist. It's important to note that this doesn't necessarily indicate a problem with the filter itself. Typically, in the case of Whirlpool refrigerators, the alarm won't reset automatically after the filter replacement. This is a task that must be carried out manually.

How to Replace the Water Filter on a Whirlpool Fridge

To reset the filter light, it's important to replace the filter first. The process of replacing the filter is relatively straightforward, and here are the steps you should follow:

1. Identify the correct filter: The filter you need depends on your specific Whirlpool fridge model. You can find the filter you require listed in the owner's manual.
2. Locate the water filter cover: The position of the cover may vary slightly based on your fridge type. Generally, you'll find it in the upper right-hand corner inside the refrigerator. You may need to consult your owner's manual to pinpoint its exact location.
3. Open and remove the old filter: Lift the filter cover upwards, and the old filter should slide out. You can dispose of the old filter.
4. Remove packaging from the new filter: Your new filter may have protective wrapping around the O-rings at the end of the filter. Be sure to remove this packaging.
5. Insert the new filter into the slot: Align the upward arrow on the new filter with the slot, and it should slide in easily. You might need to rotate it slightly to ensure it slots into place in the fridge.
6. Close the filter door: The filter cover should securely snap back into place.

After installing a new filter, it's essential to flush it by running water through it. Typically, this requires using between three and four gallons of water. Once the water runs clear, the filter will be ready for use, and the water will be safe to drink.

Why Is There a Water Filter Alert on My Whirlpool Refrigerator?

There are several reasons why you might encounter a water filter alarm on your Whirlpool refrigerator. Here are some possible explanations:

1. Filter Replacement Needed: The most common reason for the alarm is that your water filter requires replacement. Typically, it's recommended to change the water filter every three to six months, depending on your usage. You can find guidance on when to replace your refrigerator filter in my article.
2. Mechanical Issues: Occasionally, the alarm may indicate a more significant mechanical problem with your refrigerator. In such cases, it's advisable to contact a technician to inspect the appliance and diagnose the issue. However, it's a good practise to first check the filter and attempt to reset the alarm before seeking professional assistance.

Conclusion

Resetting a water filter alarm on your Whirlpool refrigerator is a manageable task, though the steps may vary depending on your specific model. You should replace the filter first, following the appropriate instructions for your fridge model.

Additionally, understanding the reasons behind the alarm, whether it's due to the need for filter replacement or potentially more significant mechanical issues, can help you address the situation effectively. By following the recommended procedures, you can ensure your Whirlpool refrigerator operates efficiently and provides clean, safe drinking water.

Authoritative References

• Whirlpool Product Help – https://producthelp.whirlpool.com

• U.S. Environmental Protection Agency (EPA) – https://www.epa.gov/watersense

• Consumer Reports – Refrigerator Buying Guide – https://www.consumerreports.org