Over the course of more than a century, Maytag has established its reputation in the market for producing durable machines that have stood the test of time. Its primary objective is to enhance your domestic life by providing products that simplify your daily household tasks.

Among Maytag's product lineup, the Maytag washing machine stands out as one of its most renowned offerings. This appliance boasts exceptional power and reliability, making laundry chores seem effortless.

Maytag offers a diverse range of washing machines in its collection, encompassing both modern and traditional models. Among these options is the Maytag Centennial washer, distinguished by its impressive features, making it an exceptional choice.

However, all these features are rendered useless if the machine fails to perform its core function of spinning to clean and dry laundry effectively.

If you're facing a similar issue where your Maytag Centennial washer refuses to spin, here are some recommended solutions worth trying out.

Maytag centennial washer not spinning – What to check to get rid of Maytag centennial washer spin problems

If your Maytag Centennial washer is not spinning, it's essential to start with the following checks:

  1. Ensure the washer's lid is closed: It may seem obvious, but it's easy to forget that the washer's lid must be securely closed during a wash cycle. The washer will not agitate or spin if the lid is left open.
  2. Verify load balance: Another crucial factor is load balance. If the load inside the washer is not properly balanced, it can lead to issues. Adjust and redistribute the clothes as necessary to ensure even distribution.
  3. Confirm the cycle selection: Double-check that you've selected the appropriate cycle for the type of load you're washing. An incorrect cycle choice can result in the washer not spinning as expected.
  4. Experiment with a higher spinning speed: If available, consider selecting a cycle with a higher spinning speed and see if this improves the spinning performance.
  5. Attempt a reset: If the previous steps haven't resolved the issue, try resetting the washer. Unplug the machine and let it sit for approximately 5 minutes before plugging it back in. This reset may resolve minor errors that could be confusing the washer's computer.

If you're still facing problems, proceed with the following steps below...

Maytag centennial washer not spinning properly

Here are some additional steps to troubleshoot and potentially resolve the issue of your Maytag Centennial washer not spinning:

  1. Inspect the drive belt: Sometimes, the problem may be due to the drive belt located beneath the rear panel of the machine not being properly connected to the pulley. Check the belt and ensure it is snug on the pulley. Tighten it if necessary, and see if this resolves the problem.
  2. Consider replacing suspension rods: Faulty suspension rods could be another common cause of the issue. If the washer is not spinning as it should, consider replacing these suspension rods.
  3. Replace the shift actuator: In cases where the washer agitates but does not spin, it may be necessary to replace the shift actuator and the clutch assembly. The actuator engages agitation, while another component called the splotch engages spinning. This washer model is known to experience issues with the shift actuator from time to time. Ensure you have the correct part numbers when purchasing replacement parts, and check compatibility with your washer model, especially when buying online, such as from
  4. Amazon. Quick Note: It's advisable to perform a self-diagnostics test on your washer before proceeding with these replacements. This will help confirm whether these components are indeed causing the problem. More details on how to initiate diagnostic mode can be found later.

By following these additional steps and performing a self-diagnostics test, you can pinpoint the root cause of the issue and make more informed decisions regarding any necessary repairs or replacements.

Pros and Cons of Maytag Centennial Washer


  • Troubleshooting
  • User-Friendly
  • Quick Resolution
  • Cost Savings


  • Not Always Effective
  • Temporary Fix
  • Risk of Misuse
  • Limited Functionality

Differences Between Maytag Centennial Washer and Samsung Top-Load Washer

Maytag Centennial

Maytag Centennial Washers are more straightforward in terms of features, focusing on essential washing functions without advanced technological extras.

Samsung top-load

Samsung top-load washers often come equipped with advanced features like smartphone connectivity, touchscreens, and various wash cycles designed for specific fabric types.

Alternative to Maytag Centennial washer

Smart Washers

Many brands now offer smart washers that can be controlled remotely through smartphone apps. These can provide added convenience and monitoring capabilities.

Maytag centennial washer not spinning fast enough

If your Maytag Centennial washer is spinning slowly, not removing all the water, and leaving clothes dripping wet, it may be due to an unbalanced load. Here are some steps to address this issue:

  1. Redistribute the clothes: Start by redistributing the clothes inside the washer. Unevenly distributed laundry can cause an imbalance during the spin cycle.
  2. Check for proper levelling: Ensure that your washer is properly levelled. A level machine helps prevent off-balance conditions during the spin cycle. Adjust the levelling feet if necessary to achieve a balanced position.

If your washer is making specific noises during spinning or sensing, here are some additional considerations:

  • A loud noise like an aeroplane taking off: If your washer is producing a loud noise that resembles an aeroplane taking off, it could be due to bad bearings. In this case, it might be more cost-effective to consider purchasing a new washer. You can check prices for new machines on Amazon.
  • High-pitched whirring sounds: If you're hearing high-pitched whirring sounds, inspect the wash plate and the plastic splotch wheel located underneath the unit. These components may require inspection or replacement.

Quick Note: When dealing with unusual or terrible noises, it's worth checking underneath the machine where the plastic wheel is located. Sometimes, it can rub against the bottom of the plastic protective housing, causing unpleasant noises.

By addressing these issues, you can potentially improve the spinning performance of your washer and resolve any noise-related problems.

Maytag centennial washer not spinning or draining

If your Maytag Centennial washer is not draining or spinning, consider the following troubleshooting steps:

  1. Inspect the drain hose:
    • Check if the drain hose is clogged. A blocked drain hose can prevent proper drainage.
    • Verify that the drain hose is correctly installed. Incorrect installation can also lead to drainage and spinning issues. Refer to your owner's manual for recommended installation instructions.
  2. Check for excessive sudsing:
    • Excessive sudsing can lead to drainage and spinning problems. Ensure that you are using the appropriate amount of detergent according to the manufacturer's guidelines. Consult your owner's manual for specific recommendations.
    • Note that if you have very soft water, you may need to use less detergent.
  3. Inspect the drain pump:
    • It's more likely that these washers experience drainage issues (resulting in water remaining in the drum) due to a fault with the drain pump rather than a spinning defect.
    • Check for any obstructions in the drain pump. Sometimes, objects or debris can become lodged in the pump, causing it to malfunction. Even small particles like sand can cause the pump to lock up behind the impeller.

By carefully checking these components and addressing any issues you find, you can potentially resolve the problems related to drainage and spinning in your Maytag Centennial washer.

Maytag centennial washer not spinning clothes dry enough

If you've exhausted all previous troubleshooting steps and your Maytag Centennial washer still won't spin correctly, it's highly advisable to run a diagnostic mode test. This will help you identify specific error codes that can provide a more accurate understanding of the issues your washer is facing. Here's what you should do:

  1. Run Diagnostic Mode:
    • Initiating diagnostic mode will typically prompt your washer to display error codes that pinpoint the problem.
    • Refer to your washer's tech data sheet for information on how to enter diagnostic mode and understand the error codes it produces.
  2. Decipher Error Codes:
    • Once you have the error codes, consult the tech data sheet to decipher their meanings and recommended actions.
    • The service sheet contains comprehensive information on how to address specific error codes.
  3. Perform Indicated Repairs:
    • Based on the error code(s) received, perform the necessary repairs or maintenance procedures to address the underlying issues.
    • Follow the recommendations in the tech data sheet to make your washer resume normal spinning.

Quick Note: If you've determined that the shift actuator is the cause of the problem, you can refer to a YouTube video for a step-by-step guide on how to replace it. This visual tutorial can assist you in completing the replacement accurately.

By following these diagnostic steps and utilizing the error code information provided in the tech data sheet, you can pinpoint the exact problem with your Maytag Centennial washer and take the necessary actions to resolve it effectively.


In conclusion, if your Maytag Centennial washer won't spin, troubleshooting the issue is essential to restore its proper functionality. We've explored various steps, from checking load balance to inspecting components like the drive belt, suspension rods, and drain pump. If these initial measures prove unsuccessful, initiating the diagnostic mode can help pinpoint the exact problem by revealing error codes. Remember to refer to the technical data sheet for error code interpretation and recommended actions. By following these comprehensive troubleshooting steps, you can address the issue and get your Maytag Centennial washer back to its optimal spinning performance, ensuring efficient and effective laundry cycles.


My name is Wisdom Bassey, I'm a blog content writer and graphic designer who provides support and services for brands and different companies. I'm young and versatile, A tech enthusiast. I carry out deep research on every topic I choose to write about. You can reach me through my social media handles, I'm always available and ready to connect.

Leave A Reply