“Several Samsung washing machine models do not feature a digital display; instead, they use flashing lights to convey error codes that demand your attention. Conversely, those equipped with a digital display will directly show the error code.
Therefore, if you observe blinking lights on your Samsung washer, you might have cause for concern. The positive aspect is that not all problems leading to this issue necessitate professional assistance. Some of these issues are relatively easy to troubleshoot and can be resolved by individuals without specialized skills.”
Samsung washer blinking light – what to check (and suggested solutions)
Flashing Light: Extra Large, Extra High, Large, or High
Indicated Error: Water not filling correctly (water supply issue)
How to Address the Problem:
- Ensure that water-supply hoses are firmly connected to the correct inlets (hot to hot, cold to cold).
- Check that the water supply hoses are not bent or kinked.
- Verify that the water supply valves are fully open.
- Avoid using flood-safe hoses.
- Make sure the drain hose is properly inserted into the drain pipe, not deeper than 6 inches, and is not kinked.
- Check that the screw holding the drain hose on the rear of the washer is in place.
- Try resetting the washer by unplugging it or flipping the circuit breaker, then power it on and attempt a new cycle.
Flashing Light: Hot & Small/Hot & Low
Indicated Error: Hot/cold water mix-up (hoses may be switched)
How to Address the Problem:
- Correct the connections; ensure the cold water supply connects to the cold inlet and the hot supply to the hot inlet (match blue to blue and red to red).
Pros and Cons of Samsung Washer
Pros
- Innovative Technology
- Energy Efficiency
- Variety of Models
- Design and Aesthetics
- Quiet Operation
Cons
- Pricing
- Complexity
- Durability
- Limited Service Network
Differences Between Samsung Washer and Amana Dryers
Samsung
Samsung is a South Korean multinational conglomerate known for its electronics and home appliances, including washers. Samsung appliances are often recognized for their innovative features and modern designs.
Amana
Amana is an American brand known for its home appliances, including dryers. Amana appliances are often associated with reliable performance and cost-effectiveness.
Alternative to Samsung washer
Electrolux
Electrolux offers front-load washers with features like Perfect Steam and SmartBoost technology, which improve stain removal and detergent dispersion.
Flashing Light: Small/Low
Indicated Error: Drainage issue (water not draining properly)
How to Address the Problem:
- Ensure the washer is level, as an uneven machine can lead to drainage problems.
- Check that the drain hose is correctly installed; it should not be inserted deeper than 6 inches and less than 8″ into the standpipe or sink.
- Secure the drain hose to prevent it from slipping down farther.
- Ensure the hose is not kinked, bent, or damaged and does not form an airtight connection.
- Do not use a drain hose extension kit.
- For washbasins, the hose should be 18 inches high (minimum) or 24 inches for specific models.
- The hose should not be more than 96 inches high (or 35 inches for washbasins).
- Clean the pump filter (for front-loader models), as a clogged debris filter can impede drainage.
Flashing Lights: Tap Cold, Cool, Medium (or Mid)
Indicated Error: Overflow (too much water in the washer)
How to Address the Problem:
- Repeat the troubleshooting procedure for the “No drain problem” mentioned above.
Flashing Lights: Cold (or Eco Warm)
Indicated Error: Stuck button on the control panel
How to Address the Problem:
- Power off the washing machine.
- Touch each button on the control panel individually, working each button back and forth to help release any stuck buttons.
Flashing Lights: Hot, Hot & Extra High, Hot & Extra Large, Hot & Large (or Hot & High)
Indicated Error: Door error (door not closed and locked)
How to Address the Problem:
- Ensure the door latch is securely in place.
- Check for any laundry or items caught in the door.
Flashing Lights: Hot & Warm
Indicated Error: Unbalanced Load Error (load not balanced inside the tub)
How to Address the Problem:
- Pause the cycle if necessary.
- Ensure the machine is not overloaded (no more than 3/4 full) or under-loaded (less than 1/3 full).
- Redistribute the load to achieve even weight distribution inside the tub.
Additionally, make sure that the cycle you’ve chosen matches the type of laundry you’re washing, and then you can proceed to resume or restart the cycle.
Conclusion
When faced with the enigmatic blinking lights on your Samsung washer, it’s important to remember that these signals are your appliance’s way of communicating an issue that requires your attention.
The array of blinking lights can signify various errors, from water supply problems to drainage issues, unbalanced loads, and even simple button malfunctions.
To address these errors, we’ve provided a comprehensive guide for troubleshooting, ensuring that you can navigate these issues with ease.
Check hose connections, inspect the drain system, and verify that the buttons are functioning correctly. Ensure that your load is balanced, and remember to select the appropriate cycle for your laundry.
By following these steps and keeping a keen eye on your Samsung washer’s blinking lights, you can save both time and money, as many issues can be resolved without the need for professional assistance.
Regular maintenance and attentiveness to your washer’s signals will keep your laundry routine running smoothly and your washing machine in excellent condition.
My name is Wisdom Bassey, I’m a blog content writer and graphic designer who provides support and services for brands and different companies. I’m young and versatile, A tech enthusiast. I carry out deep research on every topic I choose to write about. You can reach me through my social media handles, I’m always available and ready to connect.