While your washer is usually reliable, there might be a time when it refuses to power up. Thankfully, encountering startup problems doesn't have to mean the end for your dependable appliance.
So, what should you do when your Maytag front load washer won't start? Begin by verifying the power connections to ensure it's receiving sufficient electrical supply, and use these troubleshooting suggestions to pinpoint the cause of the issue.
Maytag Front Load Washer Won’t Start?
Although certain part failures might necessitate professional repair, sometimes a straightforward remedy can resolve the issue when your Maytag front load washer won't commence its cycle.
Here's a guide to help you identify the underlying cause of these starting problems and get your washer back in working order.
1. Check Power Connection
When your Maytag front load washer fails to start, and the control panel remains unlit, the culprit might be a power-related problem. To function properly, the washer relies on a sufficient supply of electricity to power its motor and other essential functions.
To inspect your power connections, follow these steps:
- Perform a Maytag washer reset: Begin by unplugging the washer for approximately 1 minute before plugging it back in to see if power is reinstated.
- Power cord: Ensure that the power cord is undamaged and fully plugged into a functional outlet. Avoid using extension cords that may not safely transmit the required power, as they can lead to interruptions in operation.
- Circuit breaker: Examine your home's circuit breaker box and reset any tripped breakers that may have caused the power disruption.
2. Washer Control Lock Engaged
If your Maytag washer is unresponsive and appears to be locked, the Control Lock feature might be engaged. This feature is designed to lock all control panel functions to prevent accidental starts. When the Control Lock is active, you'll typically see "LoC" or "LC" illuminated on the control panel.
To resolve this issue, refer to your user manual to identify how to disable the Control Lock feature specific to your washer model. Some models have a dedicated key for this purpose, while others require you to simultaneously press two keys.
Hold down the appropriate key(s) for around 3 seconds to deactivate the Control Lock feature. Once completed, "LoC" or "LC" should disappear from the control panel, and your washer should resume normal operation.